1 Gallon Suction Rod
- Kremlin 1 Gallon Suction Rod
- 10-14S fitting
- Includes an inlet strainer
5 Gallon Suction Rod
- Kremlin 5 Gallon Suction Rod
- 18 x 125 fitting or
- 26 x 125 fitting
- Includes an inlet strainer
55 Gallon Suction Rod
- Kremlin 55 Gallon Suction Rod
- 18 x 125 fitting or
- 26 x 125 fitting
- Includes inlet strainer
Hopper Kit
- 6L Hopper
- Used in conjunction with EOS Series pumps
- Allows direct pumping of paint from the hopper.
Hopper Kit
- 2L Hopper
- Used in conjunction with EOS Series pumps
- Allows direct pumping of paint from the hopper.
09-114 Tip
- Standard tip for air pressure spray techniques (Aircoat, Airmix, Aircombi)
- Maximum working pressure: 3600 PSI
Wall Mount
- Secure mount to wall
- Saves Floor space
Cart Mount
- For Portablilty
Tripod Mount
- Secure Mount
- Some Portability
Hose
16 Feet
25 Feet
32 Feet
50 Feet
Xcite Gun
The Xcite" gun is the result of the Kremlin Rexson experience since 1975. The Xcite" gun brings excellent ergonomics to the operator. Its ultra light trigger, handle design. This improves productivity and minimizes the risk of repetitive strain injuries. The Xcite" gun uses high quality components, which ensure a reliable gun while maintaining top notch performance. The latest generation of Airmix® atomization delivers unsurpassed finish quality. The operator has the ability to significantly vary the fan pattern width, without changing tips. This is very useful when painting complex shaped parts.
CUSTOMER BENEFITS
- Excellent atomization quality and homogeneity of the coating film
- Lower fluid pressure versus similar technology generating less overspray
- Atomization power to allow spraying a large range of materials
- Reduced coating consumption and energy saving
- Improved ergonomics for reduced R.S.I (repetitive strain injuries)
Performance
- An optimized air motor works perfectly with an air compressor of only 0.5 HP & delivers a low noise level
Productivity
- Large foot valve for use with wide range of materials
- Reduced fluid section volume minimizes product and solvent lost during flushing
Sustainability
- No external air distributor, 45% less spare parts than competitors for better maintenance
- Component reliability - 20 years of experience
- Closed construction decreases the risk of injuries and protects lubricant from external contamination
- Easy coupling for quick dissasembly
- Triple chrome-plated wetted parts compatible with all water-based products
- Single GT seal, no throat packing maintenance, low friction & large lubricant wet cup
- Moving seal located on the piston ensures the mechanical cleaning of the fluid section internal wall during paint pump operation
TECHNICAL DATA TABLE
| Designation | Value | Unit [metric (US imperial)] |
|---|---|---|
| Pressure Ratio | 10/1 | |
| Maximum Fluid Pressure | 60 (870) | bar (psi) |
| Maximum Air Pressure | 6 (87) | bar (psi) |
| Air Consumption | 1.9 (1.12) | m³/h (cfm) |
| Weight | 5.3 (12) | kg (lbs) |
| Maximum Temperature | 60 (140) | °C (°F) |
| Cylinder | 18 (.61) | cc (oz) |
| Sound Level | 79.4 | dBa |
| Recommended Air Pressure | 2 - 5 (29 - 72.5) | bar (psi) |
| Fluid Output at 30 cycles/mn | 0.54 (014) | l/min (gal/mn) |
| Fluid Output at 20 cycles/mn | 0.36 (0.095) | l/mn (gal/mn) |
| Fluid Volume Per Cycle | 18 | cc |
| Free Flow Rate | 1.1 (0.29) | l/mn (gal/mn) |
| Fluid Output at 15 Cycles | 0.27 (0.07) | l/mn |
| Air Consumption at 30 Cycles/mn at 4 Bar | 1.9 | m³/h |
| Displacement Per Cycle | 18 (1.09) | cc (cubic inch) |
| Motor Type | 340-2 | |
| Air Inlet | F1/4" BSP / F3/8" BSP | |
| Fluid Outlet | F1/4" NPS / M 1/2" JIC | |
| Fluid Inlet | F 1/2'' BSP / M 26x125 | |
| Hard Chrome Stainless Steel, Wetted Parts | ♦ | |
| Number of cycles per liter of products | 55 | |
| Sealing packing lower PEHD | ♦ | |
| Sealing packing upper GT cartridge with polyethylene packing | ♦ | |
| Height | 39.2 (15.5) | cm (in) |
| Width | 27.8 (11) | cm (in) |
| Depth | 15 (5.9) | cm (in) |
| Wetted parts stainless steel |
Additional Information - EOS 10-C18 Airmix Systems - Multiple Options
| Quick Order Category | Spray Finishing |
|---|---|
| Brand | Kremlin-Rexson |
| Selling Unit | System |
| Case Quantity | N/A |
